S-500 2000 command radio removal

Mercedes Benz Forum Mercedes Classifieds Photo Gallery Member List Search Mercedes History Sponsors Contact
Mercedes Benz News Calendars Forum FAQ Mercedes Recalls TSBs Timeslips Register Login

S-500 2000 command radio removal

Printable Version

Mercedes Forum >> Mercedes Benz Models >> Mercedes S Class >> S-500 2000 command radio removal

Page: [1]

Message

<< Older Topic Newer Topic >>

S-500 2000 command radio removal - 7/26/2007 12:20:37 PM

ddilillo

Posts: 14
Joined: 7/15/2007
Status: offline

Can anyone advise how to remove the command Navigational Radio from the dash. I assume the wooden bezel just pops off but I don't want to crack it.

Thanks,

Dean

Post #: 1

RE: S-500 2000 command radio removal - 7/26/2007 5:54:50 PM

sleepwalker

Posts: 7083
Joined: 4/12/2004
From: Philippine Islands
Status: offline

pull out the ashtray housing.
got two torx screws behind it. unscrew and pull out the covering.

_____________________________

support - Solar Energy

(in reply to ddilillo)

Post #: 2

RE: S-500 2000 command radio removal - 10/10/2007 4:35:50 PM

SoBeDoc

Posts: 2
Joined: 10/10/2007
Status: offline

Sleep walker
I have a 2004 sl55 and have recently purchased a dice ipod conversion kit that reportedly is plug and play replacing the cd changer. How do you remove the cd changer housing and gain access to the changer to replace it?Do you even recommend it? Thank you!

_____________________________

Thanks,
chris

(in reply to sleepwalker)

Post #: 3

RE: S-500 2000 command radio removal - 12/2/2007 6:09:44 PM

Trooper

Posts: 1
Joined: 11/23/2007
Status: offline

I presume you have found the solution by now.
However for the sake of the forum here is how I removed mine from my ’00 S-430.

Put on park brake
Turn ignition switch on
Place car in neutral
Open the ash tray compartment
Remove the torx screws on each side
After the torx screws have been removed close the ash tray compartment & remove it
The wood bezel has snaps on each side located in the 3 and 9 o’clock positions
Take your time unsnapping these snaps, one side at a time
Remove the 6 torx screws securing Command Unit
Now the Unit can be removed

(in reply to ddilillo)

Post #: 4