central locking

Mercedes Benz Forum Mercedes Classifieds Photo Gallery Member List Search Mercedes History Sponsors Contact
Mercedes Benz News Calendars Forum FAQ Mercedes Recalls TSBs Timeslips Register Login

central locking

Printable Version

Mercedes >> Mercedes Benz Models >> Mercedes E Class >> central locking

Page: [1]

Message

<< Older Topic Newer Topic >>

central locking - 8/21/2004 1:28:04 PM

HardeepG

Posts: 2
Joined: 8/21/2004
Status: offline

Hi, got a problem with my 98R E200 avantgarde i've just bought.

The locking wont work, just the lights flash, indicators work when they want to, and whenever the indicators stop working so do the electric windows.

Also i was told there was a problem with the electric sunroof in that it cannot be retracted as the guide for the steel wires have worn loose. I have been advised that i need a complete sunroof magazine, is this true, or can i just replace the guides??

Any ideas on how to fix any of these problems

Thanks for any help

Post #: 1

RE: central locking - 8/21/2004 8:13:56 PM

sleepwalker

Posts: 7083
Joined: 4/12/2004
From: Philippine Islands
Status: offline

PSE (pneumatic system equipment) pump faulty brush on motor.

steel wire on guide tube? did they open and check it? i doubt that.

(in reply to HardeepG)

Post #: 2

RE: central locking - 8/22/2004 11:37:47 AM

HardeepG

Posts: 2
Joined: 8/21/2004
Status: offline

Right, i'm on the hunt for a new PSE pump, thanks.

On the sunrrof, it was opened up and checked. I'm told its a problem with w210's made around 97/98, along with rusting around the bottom of wheel arches and doors.

If i do get a new magazine, can i buy without the glass, as my glass is in perfect condition

Thanks all

(in reply to sleepwalker)

Post #: 3

RE: central locking - 8/22/2004 6:17:05 PM

sleepwalker

Posts: 7083
Joined: 4/12/2004
From: Philippine Islands
Status: offline

of course. the glass is a separate component.

you better spray an undercoat inside the running board too. the water accumulates there during rainy days. there are two rubber grommet where you can insert noozle. a can is enough together with the wheel arch. use the rubberized type undercoat.

(in reply to HardeepG)

Post #: 4