sknight
Posts: 1
Joined: 6/22/2008
Status: offline
|
So here''s the story, just for clarification:
I''m from the US, moved over to Germany, and now have a C200 Kompressor.
The car came with a audio 10 tape deck and no changer. Needless to say, that will not suit the needs today. I brought an Alpine headunit over from the US that I had for many years and is in excellent working condition, and has an aux input, as well as a cd player. Its vintage is about 2001/2002. Actually, about a year and a half ago, the original crapped out, and I got this ebay replacement, NOS for $50, so it''s just about new. I''m not afraid to solder, but I''d rather do it in a harness than in the factory''s wiring, in this particular case. My previous car was soldered and held up for seven years.
Now my goal is to find a harness, wiring diagram of the car''s plugs, antenna adapter, and a DIN faceplate. I''ve already pulled the dash and the original radio out to see what I''m up against and the dimensions.
What is a good source? The reason I also ask on an English speaking board is because my German still isn''t good enough to pass a technical level conversation.
|
Printable Version
2000 W203 c200k: Need Leads on Harnesses and Faceplates - 
