motor mounts

Mercedes Benz Forum Mercedes Classifieds Photo Gallery Member List Search Mercedes History Sponsors Contact
Mercedes Benz News Calendars Forum FAQ Mercedes Recalls TSBs Timeslips Register Login

motor mounts

Printable Version

Mercedes Forum >> Mercedes Benz Models >> Diesel Discussions >> motor mounts

Page: [1]

Message

<< Older Topic Newer Topic >>

motor mounts - 5/24/2008 2:45:05 PM

benzman83

Posts: 8
Joined: 5/18/2008
Status: offline

How hard is it to change the motor mounts on a 300D and where can I get a vaccum diagram for this car. Thanks

Post #: 1

RE: motor mounts - 5/25/2008 2:57:58 AM

ForcedInduction

Posts: 864
Joined: 5/20/2006
From: Federal Heights, Colorado
Status: offline

They are easy. Remove the two top bolts, remove the bolt on the under side, lift the engine and swap in the new one.
http://www.pauldrayton.com/uploadfiles/merc/Service/W123/Index/617T/22EngineMounts.html

< Message edited by ForcedInduction -- 5/25/2008 2:58:31 AM >

_____________________________

1980 240D 3.0VNT 222K Miles. OM617.95, GT2256V VNT turbo, 4-speed manual, 3.46 diff, 15mm rear swaybar, ALDA removed, no EGR and Amsoil by-pass oil filter. Currently 107HP and 195lb/ft of torque at the wheels.

www.youtube.com/Turbo617

(in reply to benzman83)

Post #: 2

RE: motor mounts - 6/2/2008 7:02:44 PM

Dieseladdict

Posts: 12
Joined: 5/20/2008
Status: offline

Just curious. Would that vacumn diagram be valid for the 300SD (1979) also?

Can anyone tell me whether there is a separate Haynes manual for the 300SD or does one just use the one for the 123 series? I can't seem to find a separate manual for the 116 series.

(in reply to ForcedInduction)

Post #: 3

RE: motor mounts - 6/2/2008 9:50:24 PM

ForcedInduction

Posts: 864
Joined: 5/20/2006
From: Federal Heights, Colorado
Status: offline

I can't find a W116 diagram. It is not the same as the W123 and w126.

Basically this is all you need. Ignore the white tube going off to the left and the other tube tee-ing off the black tube after 65.

Thumbnail Image

Attachment (1)

_____________________________

1980 240D 3.0VNT 222K Miles. OM617.95, GT2256V VNT turbo, 4-speed manual, 3.46 diff, 15mm rear swaybar, ALDA removed, no EGR and Amsoil by-pass oil filter. Currently 107HP and 195lb/ft of torque at the wheels.

www.youtube.com/Turbo617

(in reply to Dieseladdict)

Post #: 4

RE: motor mounts - 6/3/2008 8:17:39 AM

Dieseladdict

Posts: 12
Joined: 5/20/2008
Status: offline

thanks.

(in reply to ForcedInduction)

Post #: 5