mopar460
2/23/2006 11:43:16 PM
G`day all,
let me start out by introducing myself. Im Pete. The missus and I recently became the proud owners of our second MB.
A lovely dark blue 1988 560sel. We had to sell the first one when we left Australia to come over to the states.
Down to business, what I would like to find out if possible. How would I go about removing the center console to get to the window
switches? the switch controlling the drivers window decided to give up the ghost tonight on the way home. and I now have a window which is three quarters of the way down and wont go back up.
Any help would be muchly appreciated.
Thanks,
Pete.
sleepwalker
2/24/2006 12:12:19 AM
welcome pete.
>pull out ashtray
>unscrew the 2 screws you see inside (ashtray)
>remove ashtray and pull out connector
>remove radio
>pull knobs from a/c switches and remove nut
>remove all switches
>remove the fastening screw underneath it
>pull cover in downward direction
>pull out sockets with bulbs
>push that shift lever cover forward and remove partly
>you may disconnect the switches connector and enjoy being a handyman this time.
mopar460
2/24/2006 12:42:18 PM
Sleepwalker you are a absolute GEM.
Thanks very much for your help. It was invaluble. The hardest part was getting my fat cold fingers to co-operate out in the cold.
Once I got started it took less than 15 minutes to fix the problem. And not too soon either. The weather is nasty here at the moment, cold biting wind and maybe a chance of snow.
Once again thanks.
Pete.
